കൂടുതലായി പ്രചാരത്തിലുള്ള ടെലിവിഷന് മൊഡലുകളില് ചിലവയുടെ സര്വ്വീസ് കോഡുകള്
SONY / LG / SAMSUNG / VIDEOCON / SANSUI / PHILIPS / TCL
SONY Colour Television Receiver
Models:G-Series,J-Series,KV-G21M1,KV-G14F2RS,KV-2197M3(RM-870),KV-G14M1,KV-G14MD1,KV-G14P1,KV-G14P1,KV-G14P11,KV-G14Q1,KV-G14S1(RM-870),KV-J21MF1,KV-J21MH1,KV-J21MN11(RM-870),KV-2168MT,KV-2169MNT(RM-870),KV-XF29M35,KV-XF29M63,KV-XF29M93,KV-XF25M21,KV-XF25M63,KV-XF25M93 (RM-945).KV-XA21M80,KV-XA21M83.KV-XA21M50,KV-XA21M61,KV-XA21M60(RM-952),KV-XF25M81,KV-XF25M80(RM954),KV-F29MF1,KV-F29MH11,KV-F29MH31,KV-F29MN11,KV-F29MN31(RM-857),(RM-858)
For entering into service mode:
· Press the remote control key in the following sequence
STANDBYðDISPLAYð5ðVOL+ðPOWER
· To raise/lower service item no: press numeric buttons “1” or “4”
· To raise/lower data value: press: “ MUTING” Button on handset
· To execute writing in memory; press “0” on handset
· To cancel service mode ; turn the TV into standby by pressing “POWER” button on the handset, and then again switch on the TV by pressing the same button
Chassis:AE2,AE-2B,AP-2
Models: KV-E5231,KV-E2931,KV-E3431,KV-E2551A/B/E/K,KV-S29JN1/MN1/SN1,KV-S34/JN1/MN1/SN1/,KV-B2911,KR-S4613
For entering into Service Mode:
· Turn on the main power switch of the set while pressing any two buttons on the front panel. “TT” will appear on the upper right corner of the screen. Press the “MENU” button on the remote control handset. In menu select “DEMO” and press “OK” Select DEVICE corresponding to the adjustment you need.
· To store; “OK”
· To exit: turn off the set.
Chassis: AE-2
Models: KV-B2911/A/D/B/K,KV-B2913E
For entering service mode:
· Turn on the main power switch of the set while pressing any two buttons on the front panel. “VOL” will appear on the upper right corner on the screen. Press the “MENU” button on the remote control handset.
Chassis:BE-4
Models:KV-2170,KV-2180,KV-2540
For entering into service mode:
· Press remote control keys in the following sequence
· ?ð5ðVOL+ðTVðMENU
· To exit: 00
Chassis:VE-3V,BE-3B
Models:KV-C2171K,KV-C2171K,KV-C2171KR,KV-X2501K,KV-X2581K,KV-X2581KR,KV-M2540K,KV-M2541K,KV-X2901K,KV-X2981K,KV-X2981KR,KV-M1440,KV-M2170,KV-M2171,KV-M2181,KV-M2101,KV-24WS1A/B/D/E/K/RU(RM-837)
Processor:CXP85340A-116Q/117Q
For entering into Service Mode:
· Press the remote control keys in the following sequence
DISPLAY ON SCREENð5ðVOL+ðTV
· “TT” will appear at upper top corner.
Chassis:G1
Models: KV-S29RN1,KV-S34RN1
For entering into Service Mode:
· Set the TV in on duty mode. Press from the board following button sequence
DISPLAYð5ðVOL+ðPOWER
Chassis:AE-2F
Models: KV-S2941A/B/D/K,KV-2943E (RM-831)
For entering into service mode:
· Twice press button “VKL” on board. In a right top corner “TT” will appear then press button “MENU”
Chassis: BE-3D,BE-4
Models:KV-24WS1A/B/D/E/K/R/U (RM-862)
Processor:MSP3410B-PS-F7-T,MSP3410C-PS-C6-T
KV-2181KR,KV-M2540,KV-29X1A/B/D/E/K/L/R/U
For entering into Service Mode:
· Set the TV in on duty mode. Press from the board following button sequence
ON SCREEN DISPLAYð5ðVOL+ðTV
LG Colour Television Receiver
Models:SAMPOORNA,RF-14A80K ADKBBIN,RF-14/20/21CA30K,RF-14/20/21CA30KE, RF-20/21CB30F,RF-20/21CB30VE,RF-21FA20KE,CF-14D79K,CF14D79KE,CF20/21D79K,CF20/21F69K,CF-20/21S12KE,CF-20/21D331KE,CF-20/21S42KS
All Latest Models
For entering service mode:
· Simultaneously press “OK” button on remote handset and on the front panel of television receiver for 6 to 8 seconds.
· Controls: YELLOW button (Q-VIEW button)
· Accessing parameters: Program Up/Dn buttons
· Changing data value: Volume Up/Dn buttons
· To exit: Switch of the set
SAMSUNG Colour Television Receiver
Models: CB-14EV,CB-14E5,CB-20E5,CB-20F4
All Latest Models
For entering into service Mode:
· Press the remote control keys in the following sequence
POWERðDISPLAYðMENUðMUTEðPOWER
· Controls : CH/P Up/Dn keys
· Changing data value: Volume +/- keys
· To exit Switch off the set.
VIDEOCON Challenger Dlx Colour Television Receiver
Models:3634R,5134R,5443-R
For entering into Service Mode:
· Short contacts of the hidden SERVICE key inside the remote handset.
· After getting the screen of “SERVICES” press desired numeric key (“0”, “1”, “2”, “3”, “4”, “5”, “6”) to go into that menu.
· To enter into Service Mode, press numeric button “1”
· To enter into Design Mode, press numeric button “2”
· To enter Factory Shipping Mode, Press numeric button “3”
· To enter into Manufacturing Mode press numeric button “4”
· To access any parameter, use Up/Dn Keys of Program /Channel
· To change value of any parameter, use +/- keys of volume
· To exit, again short contacts of hidden Service Key or switch off the set into standby
SANSUI/VIDEOCON Colour Television Receiver
Models: SV-2012,SV-1412/5136-R
For entering into Service Mode:
· Short contacts of the hidden SERVICE key Inside the remote handset
“TEST” will appear on the screen.
· Now, Press numeric keys ( “1”, “2”, “3”, “4”, “5”, “6”, “7”, “8”, “9” & “0” ) on the remote handset to get the various service menus.
· Note that menu no. 3,4 & 5 are general menus while menu no.1,2,6,7,8,9 & 0 are special menus. To access these menu enter special code “991220” when “TEST” appears on the screen.
· To access any parameter , use Up/Dn keys of Program/Channel
· To change value of any Parameter, use +/- keys of Volume
· To exit , again short contacts of hidden Service key or switch off the set into Standby
PHILIPS UOC Kit
For entering into Service Mode:
· First Press ‘MENU’ button and numeric key “1147”on the remote handset to get the various service menus.
· To access any parameter , use Up/Dn keys of Program/Channel
· To change value of any Parameter, use +/- keys of Volume
TCL Colour Television Receiver
Model:T2111A
· Simultaneously press “DISPLAY” button on remote handset and Volume- button on the front panel of television receiver for 6 to 8 seconds to get the various service menus.
· To access any parameter , use Up/Dn keys of Program/Channel
· To change value of any Parameter, use +/- keys of Volume
· To exit POWER switch off the set
No comments:
Post a Comment